લોખંડ: આવૃત્તિઓ વચ્ચેનો તફાવત

Content deleted Content added
નાનું Dinesh27 (talk)દ્વારા ફેરફરોને Xqbot દ્વારા કરેલા છેલ્લા સુધારા સુધી ઉલટાવાયા.
{{ભાષાંતર}} અને ભાષાંતરીત થયેલા અંગ્રેજી ફકરા હટાવ્યા..
લીટી ૧:
{{ભાષાંતર}}
[[ચિત્ર:Fe-TableImage.png|250px|thumb|right|[[આવર્ત કોષ્ટક]]માં લોખંડ]]
'''લોખંડ''' એક રાસાયણિક [[તત્વ]] છે જેનું ચિહ્ન '''Fe''' ([[લૅટિન]]: ''Ferum - ફેરમ્'') છે.તેની ક્રમાંક ૨૬ છે. લોખંડ એ નરમ, ચળકતી [[ધાતુ]] છે. અવકાશ માં [[તારા]]ઓના નિર્માણ ચક્રમાં લોખંડ અને નિકલ એ બે ધાતુઓ અંતિમ ભાગમાં બને છે, અને તે આ પ્રક્રિયા દ્વારા બનતું સૌથી ભારે તત્વ છે. આ કારણે તે [[પૃથ્વી]] પર, તેમજ અવકાશી પદાર્થોમાં મોટા પ્રમાણમાં મળી આવે છે. લોખંડ એક મજબુત ધાતુ છે, આથી તેનો [[ઉદ્યોગ|ઔદ્યોગિક]] ક્ષેત્રે, ઓજારો તથા [[હથિયાર|હથિયારો]] બનાવવામાં ભરપૂર ઉપયોગ થાય છે. આ રીતે [[માનવ ઇતિહાસ]] ઘડવામાં લોખંડનો મહત્વનો ફાળો રહેલો છે.
Line ૩૨ ⟶ ૩૩:
|-
!વિશ્વ(World)!! 1,594.9!!914.0!! 64.5!! 1,232.4
|}
 
 
Iron is the most widely used of all the metals, accounting for 95% of worldwide metal production.[citation needed] Its low cost and high strength make it indispensable in engineering applications such as the construction of machinery and machine tools, automobiles, the hulls of large ships, and structural components for buildings. Since pure iron is quite soft, it is most commonly used in the form of steel.
 
આયર્ન સૌથી વ્યાપક રીતે તમામ ધાતુઓના વપરાય છે, વિશ્વભરમાં ધાતુ ઉત્પાદનમાં 95% હિસ્સો ધરાવે છે. તેના નીચા ખર્ચ અને વધુ મજબૂત તેને મશીનરી અને મશીન ટૂલ્સ, ઓટોમોબાઇલ્સ, તો મહત્વના ખુબ જ જરુરી બાંધકામ જેમ કે એન્જિનિયરિંગ કાર્યક્રમોમાં અનિવાર્ય માળખાકીય ઘટકો બનાવવા મોટા જહાજો, અને ઇમારતો માટે વપરાય છે. શુદ્ધ લોહ તદ્દન સોફ્ટ છે, તે એકદમ સામાન્ય રીતે સ્ટીલ સ્વરૂપમાં જ વપરાય છે.
 
Commercially available iron is classified based on purity and the abundance of additives. Pig iron has 3.5–4.5% carbon[52] and contains varying amounts of contaminants such as sulfur, silicon and phosphorus. Pig iron is not a saleable product, but rather an intermediate step in the production of cast iron and steel from iron ore. Cast iron contains 2–4% carbon, 1–6% silicon, and small amounts of manganese.
 
વ્યાપારીક રીતે ઉપલબ્ધ લોહ શુદ્ધતા અને ઉમેરણોની ઉપલબ્ધિ પર આધારિત વર્ગીકૃત કરવામાં આવે છે. [[પિગ આયર્ન]] 3.5-4.5% કાર્બન અને જેમ કે અશ્શુદ્ધિઓ (જેમ કે [[સલ્ફર]], [[સિલિકોન]] અને [[ફોસ્ફરસ]] વિગેરે) વિવિધ માત્રામાં ધરાવે છે. કાચું લોખંડ વેચાઉ ઉત્પાદન નથી પરંતુ બીડ(કાસ્ટ આયર્ન-Cast iron) અને લૌહ અયસ્ક કે લોખંડ, સ્ટીલના ઉત્પાદન માટેનુ એક મધ્યવર્તી પગલું(સ્વરૂપ) છે. બીડ(કાસ્ટ આયર્ન) એ 2-4% કાર્બન, 1-6% સિલિકોન, અને થોડી માત્રામાં [[મેંગેનીઝ]]ધરાવે છે.
 
Contaminants present in pig iron that negatively affect material properties, such as sulfur and phosphorus, have been reduced to an acceptable level. It has a melting point in the range of 1420–1470 K, which is lower than either of its two main components, and makes it the first product to be melted when carbon and iron are heated together. Its mechanical properties vary greatly, dependent upon the form carbon takes in the alloy.
અશુદ્ધિઓ(જેવી કે સલ્ફર અને ફોસ્ફરસ) પિગ આયર્નમા હાજર છે કે ગુણધર્મો પર નકારાત્મક અસર કરે છે તેમને એક સ્વીકૃત સ્તર સુધી ઘટાડી દેવામાં આવી છે. તેઓનુ ગલન બિંદુ 1420-1470 કેલ્વિન(K) છે, જે તેના બે મુખ્ય ઘટકો ક્યાં કરતાં ઓછુ છે અને તેને કાર્બન અને લોહ મળીને જ્યારે ગરમ કરે છે ત્યારે ઓગાળી શકાય અને લોહ ઉત્પાદન કરી શકાય છે. કાર્બન સ્વરુપ પર આધારિત તેના યાંત્રિક ગુણધર્મોમા મોટો ફેરફાર તેમને મિશ્રધાતુ(alloy-એલોય) માં લઈ જાય છે.
 
"White" cast irons contain their carbon in the form of cementite, or iron carbide. This hard, brittle compound dominates the mechanical properties of white cast irons, rendering them hard, but unresistant to shock. The broken surface of a white cast iron is full of fine facets of the broken carbide, a very pale, silvery, shiny material, hence the appellation.
 
"શ્વેત" કાસ્ટ આયરન એ કાર્બનને તેમના આયરનcementite, અથવા લોહ CARBIDE સ્વરૂપમાં સમાવે છે. આ હાર્ડ, બરડ સંયોજન સફેદ કાસ્ટ આયરન યાંત્રિક ગુણધર્મો પર પ્રભુત્વ ધરાવે છે, તેમને હાર્ડ બનાવે છે, પરંતુ આઘાત માટે unresistant છે. સફેદ કાસ્ટ આયર્નની તૂટેલી સપાટી તૂટેલ CARBIDE, બહુ નિસ્તેજ, ચાંદી, ચળકતી સામગ્રી, તેથી સજ્ઞા દંડ પાસા ભરેલી છે.
Line ૬૧ ⟶ ૫૨:
 
The main disadvantage of iron and steel is that pure iron, and most of its alloys, suffer badly from rust if not protected in some way. Painting, galvanization, passivation, plastic coating and bluing are all used to protect iron from rust by excluding water and oxygen
 
 
 
 
 
 
==સંદર્ભો==