This template generates an infobox for roads, both numbered and unnumbered. Below is the basic syntax that you need to get a complete infobox for an article. Place this below any hatnotes and before any other text and fill in the variables. If a variable is empty, it can and should be omitted. Other, more specific parameters exist and are described in detail below.

This is the basic code you need to set up an infobox for a numbered route.

{{Infobox road
|country=
|type=
|route=
|map=
|length_mi=
|length_km=
|length_round=
|length_ref=
|established=
|direction_a=
|terminus_a=
|junction=
|direction_b=
|terminus_b=
|previous_type=
|previous_route=
|next_type=
|next_route=
}}

This is the basic code you need to set up an infobox for an unnumbered route.

{{Infobox road
|name=
|marker_image=
|map=
|length_mi=
|length_km=
|length_round=
|length_ref=
|established=
|allocation=
|direction_a=
|terminus_a=
|junction=
|direction_b=
|terminus_b=
}}

These parameters are typically used only for numbered routes.

  • country: the ISO 3166-1 alpha-3 code of the country that the route is in. Use this list to find the correct code for the country. These countries have had the necessary subtemplates set up; see that page for instructions on how to set up new countries. If the route is located in Australia, the United States, Canada, or Mexico, and the route is located within one state or province use state (Australia, US, and Mexico) or province (Canada) instead. The "state" and "province" parameters are not interchangeable. Accepted values for these two parameters are as follows:
    • Australian state: the two- or three-letter abbreviation of the state. Note: |country=AUS must also be set if the state is NT or WA to avoid conflicts with other countries.
    • U.S. state: the two-letter postal abbreviation of the state.
    • Canadian province: the two-letter postal abbreviation of the province.
    • Mexican state: the three-letter ISO 3166-2:MX code of the state, minus the "MX-" prefix.
  • type: the type of route the article is about. See this page for a list.
  • subtype: the type of special route that the article route is, if applicable
  • county: the county associated with the route that the article is about. Use only for county routes.
  • route: the number of the route.
  • section: the section of code that defines this route. Very few areas use this, and the appropriate subpage ([[/law/USA]] for example) must be set up for the parameter to work. The state of Minnesota also uses subsection to specify the exact section of the legal code definition.
  • spur_type: defines the type of route that the route is a spur of. Use for spur routes, such as a loop road, bypass, alternate route, business route, truck route, or other type of route. Example: Use WV for West Virginia Route 10 Alternate.
  • spur_of: defines what the parent route is, such as Highway 7A's parent is Highway 7, or Interstate 110's parent is Interstate 10. The usual text that would go here is the road number, such as "7" or "10" or "500".
  • previous_type: this is the type of route that proceeds the current one in the system. See this page for a list.
  • previous_route: the number of the route preceding this one
  • previous_dab: any disambiguation needed to generate the correct link to the previous route
  • browse_route: the route associated with the current browse row. Typically used only if the browsing route is not the route that the rest of the infobox is about.
  • next_type: same as "previous_type" but for the route following this one
  • next_route: the number of the route succeeding this one
  • next_dab: same as "previous_dab" but for the route following this one
  • browse: use to add additional browse lines, which are generated by templates similar to {{ny browse}}. These templates accept the seven parameters given above plus "county"; however, "route" is used instead of "browse_route".

These parameters are typically used only for roads of a historic nature, such as the Silk Road.

  • time_period: the time period that the road existed in.
    • established_by: the body that built or established the road. Used only in conjunction with "time_period".
    • significance: the historical/cultural significance of the route. Used only in conjunction with "time_period".
    • related: roads related to the historical road. Used only in conjunction with "time_period".
  • marker_image: shield image to be displayed. Requires full wiki markup. Typically not needed for numbered routes.
  • name: road name to be displayed. Typically not needed for numbered routes.
  • maint: the agency that maintains the highway. If the appropriate subpage ([[/maint/USA]] for example) exists and a specific jurisdiction is specified (such as "state=AZ"), this parameter will be filled in automatically with that jurisdiction's department of transportation. "maint" still works, however, if the default agency needs to be overwritten, for instance if the route is maintained by another agency.
  • alternate_name: Use in situations where the entire route has another name. For example, New York State Route 590 is called the Sea Breeze Expressway for its entire length.
  • map: image name of a map for the route, without the File: namespace prefix, which the template will place into an image link for you. For example, map=map_name|map_alt=alt text will render as: [[File:map_name|290x172px|alt=alt text]]. Note: this will pull the file name from Wikidata if left empty and the associated item has the information.
    • map_alt: alt text for the map, for visually impaired readers. See WP:ALT. This parameter should be specified if map is specified.
    • map_notes: an optional parameter with text to display along with the map.
    • map_custom: optionally set to yes if you want to override the template's default image link; then you may specify your own complete image link with: map=[[File:map_name|...]]
    • For best results, your map image width should be 290px.
    • See the WP:USRD maps task force for maps for roads in the United States.
  • photo or image: image name of a photo for the route, without the File: namespace prefix, which the template will place into an image link for you. For example, photo=photo_name|photo_alt=alt text will render as: [[File:photo_name|290px|alt=alt text]].
    • photo_alt or image_alt: alt text for the photo, for visually impaired readers. See WP:ALT. This parameter should be specified if photo is specified.
    • photo_notes or image_notes: an optional parameter with text to display along with the photo.
    • This set of parameters will not work for articles in the United States per WP:USRD consensus.
  • length_mi or length_km: length of the route in miles (in countries where the imperial system is used) or kilometres (in countries where the metric system is used). Only one can be used in an article. The value from the one defined is the one that appears first. The other is calculated and rounded to the same level of precision as the stated value. If neither "length_mi" nor "length_km" exists, no length is displayed.
    • length_round: number of decimal places to be used in the conversion. If the length should be converted to a greater precision than the given value, adjust length_round to match but be sure to avoid false precision.
    • length_ref, if defined, appears after the first length. Use a citation for the length or {{fact}} here. Be sure that the first length is the one for which you have a reference.
    • length_notes, if defined, appears as a note below the length. This can be used to show former length, or future length, etc.
  • established: this is the date the route was commissioned or assigned to its current alignment. (Alternate parameter: formed)
  • decommissioned: date the route was decommissioned (Alternate parameter: deleted)
  • history: a brief summary of the route's history. Typically used in place of the above two parameters.
  • allocation: a list of highway designations allocated to the roadway. For Australia, this uses a label of "Allocation:" while for other countries it will use "Component highways:" instead.
  • tourist: a list of the tourist routes that follow the route; currently only set up for use in Australia, New Zealand, Canada, and the US.
  • restrictions: a brief mention of any restrictions on the road. Examples include regular seasonal closures or permit requirements needed by motorists.
  • beltway_city, orbital, loop, or tloop: for beltways, orbitals, loop roads, or tourist loops only. This is the city that the beltway/orbital/loop encircles. The output differs between the three to accommodate variation in English for different geographic areas. In the case of tourist loops, using |tloop=none will omit a location around which the roadway would loop.
  • direction_a: for U.S. roads, this should be either "South" or "West" per the standards set by the U.S. Roads project. For roads in other jurisdictions, consult that area's WikiProject to determine which direction to put here.
  • terminus_a or end_a: this is where the route begins and, for U.S. roads, is either at the southern terminus or western terminus
  • junction: a list of major junctions. Each WikiProject has different standards for major junctions, so consult the relevant WikiProject for more details.
  • direction_b: The opposite of "direction_a"
  • terminus_b or end_b: where the route ends, in accordance with the guidelines set forth with terminus_a

This template is capable of creating separate "major intersection" sections for individual segments of a route that is split into two to four segments. The parameters associated with this feature are:

  • section#, where # is the number of the segment (1 being the first entered into the infobox, 2 being the next, and so on). By default, the text "Major intersections" is replaced in the header with "Section #"; this parameter allows for a custom header to be used.
  • length_mi# or length_km#: "length_mi" or "length_km" for the # segment
    • length_round#: "length_round" for the # segment
    • length_ref#: "length_ref" for the # segment
    • length_notes#: "length_notes" for the # segment
  • direction_a: same as described above; however, in this usage it will provide a default direction for the beginning point of all of the segments. If the direction of one endpoint is different, use direction_a# for that endpoint.
  • terminus_a# or end_a#: "terminus_a"/"end_a" for the # segment
  • junction#: "junction" for the # segment
  • direction_b: same as described above; however, in this usage it will provide a default direction for the ending point of all of the segments. If the direction of one endpoint is different, use direction_b# for that endpoint.
  • terminus_b# or end_b#: for the # segment

This infobox has several parameters to list locations; however, many are restricted to use in only certain regions or countries for various reasons, including but not limited to local WikiProject consensus and common sense (for example, "countries" shouldn't be used on intra-country articles, and since the only locations with rural municipalities are Manitoba and Saskatchewan, "rural_municipalities" should be used there and nowhere else). Even where usage is possible, each parameter is still optional on an article-by-article basis based on local consensus.

Parameter Usage Allowed for
countries a list of countries that the route enters EUR, ASIA
regions a list of regions that the route enters EUR, ITA, HRV, CZE, CYP, GRC, POL, HUN, SVN, SVK, AUT, TUR, UKR, BIH, SRB, SGP
states a list of states that the route enters USA (but not for intrastate articles), IND, DEU
provinces a list of provinces that the route enters IRN, TUR, THA
counties a list of counties that the route enters no restrictions
parishes a list of parishes that the route enters no restrictions, but use only in Louisiana
rural_municipalities a list of rural municipalities that the route enters Manitoba, Saskatchewan
municipalities a list of municipalities that the route enters no restrictions, but use only in Puerto Rico
districts a list of districts that the route enters no restrictions, but use only in Indian states and other locations with districts instead of counties
cities used to list the cities that the route serves everywhere but USA per USRD standards
towns used to list the towns that the route serves everywhere but USA per USRD standards
villages used to list the villages that the route serves everywhere but USA per USRD standards
destinations used to list the Primary destinations that the route serves AUS, GBR, IRL, MYS, NZL, IND
lga used to list the Local Government Areas that the route servers AUS
locations used to list the locations that the route serves; label varies based on route type AUS
  • header_type: IBR has a small set of alternate header shades for specific sets of articles. They are:
    • under construction: for roads where construction has begun on the highway and no sections have been opened to traffic. Do not use for roads that are open to traffic in some capacity. (Alternate values: const, uc)
    • historic: for roads of a historic nature, such as auto trails or highways posted with brown, historical or scenic signage. (Alternate values: historical, hist, scenic)
    • former: for highway designations no longer maintained by the corresponding government authority. (Alternate value: decommissioned)
    • freeway: Canada only. For roads that are freeways for their entire length.
    • minor: UK only. For A roads signed with black-on-white markers.
  • system: the highway system that the article route is part of. Typically not needed for numbered routes.
  • e-road, ahn or tahn: used to indicate that a roadway is part of the International E-road network in Europe, the Asian Highway Network or the Trans-African Highway network.
    • e-road-shield, ahn-shield or tahn-shield: shield or route marker image for the E-road, AHN or TAHN route. Requires full wiki markup.
  • embedded: embed another infobox with such capability like {{Designation list}} and {{Infobox NRHP}}.

See this page for details on the inner workings of the template.

New Jersey Turnpike marker

New Jersey Turnpike
માર્ગ માહિતી
the New Jersey Turnpike Authority વડે દેખરેખ
લંબાઈ૦ માઇલ[][] (૦ કિ.મી.)
11.03 mi (17.75 km) Western Spur[]
6.55 mi (10.54 km) Pennsylvania Extension[]
8.17 mi (13.1 km) Newark Bay Extension[]
અસ્તિત્વ1951–હાલમાં
મહત્વનાં જોડાણો
South અંત I-295 / US 40 in Pennsville
  US 40 in Carneys Point Township
I-95 / Penna. Tpk. in Mansfield Township
I-195 in Robbinsville Township
Route 18 in East Brunswick
I-287 / Route 440 in Edison Township
G.S. Pkwy. / US 9 in Woodbridge Township
I-278 in Linden/Elizabeth
I-78 in Newark
I-280 in Kearny
Route 495 in Secaucus
North અંત I-95 / US 1/9 / US 46 in Fort Lee
Highway system
New Jersey State Highway Routes
Interstate and US
Error: package.lua:80: module 'Module:Road data/strings/USA/NJ' not found700 Error: package.lua:80: module 'Module:Road data/strings/USA/NJ' not found
I-95 Route 101
I-295 Route 303
{{Infobox road
|state=NJ
|type=Turnpike
|maint=the New Jersey Turnpike Authority
|length_mi=122.40
|length_round=2
|length_ref=<ref name="sld 0">{{cite web|url=http://www.state.nj.us/transportation/refdata/sldiag/00000700__-.pdf|title=Route 700 Straight Line Diagram|access-date=2007-04-26|format=PDF|publisher=[[New Jersey Department of Transportation|NJDOT]]}}</ref><ref name="sld 1" /><!--equation is 76.78+52.17-6.55=122.4-->
|length_notes={{convert|11.03|mi|km|2|abbr=on|}} Western Spur<ref name="sld 2">{{cite web|url=http://www.state.nj.us/transportation/refdata/sldiag/00000095W_-.pdf|title=Route 95W Straight Line Diagram|access-date=2007-04-26|format=PDF|publisher=[[New Jersey Department of Transportation|NJDOT]]}}</ref><br>{{convert|6.55|mi|km|2|abbr=on}} Pennsylvania Extension<ref name="sld 1">{{cite web|url=http://www.state.nj.us/transportation/refdata/sldiag/00000095__-.pdf|title=Route 95 Straight Line Diagram|access-date=2007-04-26|format=PDF|publisher=[[New Jersey Department of Transportation|NJDOT]]}}</ref><br>{{convert|8.17|mi|km|1|abbr=on}} Newark Bay Extension<ref name="sld 3">{{cite web|url=http://www.state.nj.us/transportation/refdata/sldiag/00000078__-.pdf|title=Route 78 Straight Line Diagram|access-date=2007-04-26|format=PDF|publisher=[[New Jersey Department of Transportation|NJDOT]]}}</ref>
|established=1951
|direction_a=South
|direction_b=North
|terminus_a={{jct|state=NJ|I|295|US|40}} in [[Pennsville Township, New Jersey|Pennsville]]
|junction={{jct|state=NJ|US|40|nolink=yes}} in [[Carneys Point Township, New Jersey|Carneys Point Township]]<br />[[Image:I-95.svg|20px|link=]][[Image:Pennsylvania Turnpike logo.svg|20px|link=]] [[Interstate 95 (New Jersey)|I-95]] / [[Pennsylvania Turnpike|Penna. Tpk.]] in [[Mansfield Township, Burlington County, New Jersey|Mansfield Township]]<br />{{jct|state=NJ|I|195}} in [[Robbinsville Township, New Jersey|Robbinsville Township]]<br />{{jct|state=NJ|NJ|18}} in [[East Brunswick Township, New Jersey|East Brunswick Township]]<br />{{jct|state=NJ|I|287|NJ|440}} in [[Edison, New Jersey|Edison Township]]<br />{{jct|state=NJ|GSP||US|9}} in [[Woodbridge Township, New Jersey|Woodbridge Township]]<br />{{jct|state=NJ|I|278}} in [[Linden, New Jersey|Linden]]/[[Elizabeth, New Jersey|Elizabeth]]<br />{{jct|state=NJ|I|78}} in [[Newark, New Jersey|Newark]]<br />{{jct|state=NJ|I|280}} in [[Kearny, New Jersey|Kearny]]<br />{{jct|state=NJ|NJ|495}} in [[Secaucus, New Jersey|Secaucus]]
|terminus_b={{jct|state=NJ|I|95|US|1/9|US|46}} in [[Fort Lee, New Jersey|Fort Lee]]
|previous_type=I
|previous_route=695
|browse_route=700
|next_type=I
|next_route=895
|browse={{nj browse
|previous_type=I
|previous_route=95
|route=[[Image:NJ 100 (cutout).svg|20px]]
|next_type=NJ-old
|next_route=101
}}{{nj browse
|previous_type=I
|previous_route=295
|route=[[Image:NJ 300 (cutout).svg|20px]]
|next_type=NJ
|next_route=303
}}
}}
  1. "Route 700 Straight Line Diagram" (PDF). NJDOT. મેળવેલ 2007-04-26.
  2. ૨.૦ ૨.૧ "Route 95 Straight Line Diagram" (PDF). NJDOT. મેળવેલ 2007-04-26.
  3. "Route 95W Straight Line Diagram" (PDF). NJDOT. મેળવેલ 2007-04-26.
  4. "Route 78 Straight Line Diagram" (PDF). NJDOT. મેળવેલ 2007-04-26.
TemplateData

An infobox template for highway articles.

Template parameters

ParameterDescriptionTypeStatus
Countrycountry

The ISO 3166-1 alpha-3 code of the country the route is in.

Stringoptional
Statestate

The two to three letter abbreviation of the Australian, U.S., or Mexican state the route is in.

Stringoptional
Provinceprovince

The two letter postal abbreviation of the Canadian province the route is in.

Stringoptional
Typetype

The type code of the route from Template:Infobox_road/doc/type.

Stringoptional
Route numberroute

The number of the route.

Stringoptional
Marker imagemarker_image

Marker image or shield to be displayed. Use full wiki markup. Not needed for numbered routes, usually.

Stringoptional
Namename

The name of the road (not used for numbered routes).

Stringoptional
Alternate namealternate_name

The alternate name of the road. Use only when the entire route has that name.

Stringoptional
Maintenancemaint

The agency that maintains the road. Numbered routes have this automatically populated.

Stringoptional
Mapmap

The file name of the map of the road, without File:. If this is blank and the map is available on Wikidata, it will be used.

Stringoptional
Map alternate textmap_alt

The alternate text for the map, for visually impaired readers.

Stringoptional
Map notesmap_notes

Text to display with the map.

Stringoptional
Photophoto image

A photo to display, without File:. Does not work in the US.

Stringoptional
Photo alternate textphoto_alt image_alt

The alternate text for the photo, for visually impaired readers.

Stringoptional
Photo notesphoto_notes image_notes

Text to display with the map.

Stringoptional
Map custommap_custom

Use yes if you want to override the template's default image link; then use the Map parameter to specify a link instead.

Stringoptional
Length in mileslength_mi

If and only if the route is in a country on the imperial system, list the length in miles here.

Numberoptional
Length in kilometreslength_km

If and only if the route is in a country on the metric system, list the length in kilometres here.

Numberoptional
Length roundlength_round

Number of decimal places to be used in the conversion.

Numberoptional
Length referencelength_ref

A reference for the given length.

Stringoptional
Length noteslength_notes

Notes for the length.

Stringoptional
Establishedestablished formed

Date the route was commissioned.

Stringoptional
Decommissioneddecommissioned deleted

Date the route was decommissioned.

Stringoptional
Historyhistory

Summary of the route's history, instead of the established and decommissioned fields.

Stringoptional
Allocationallocation

Highway designations allocated to the roadway.

Stringoptional
Tourist routestourist

Tourist routes that follow the route (Australia, New Zealand, Canada, US).

Stringoptional
Restrictionsrestrictions

Summary of the route's restrictions such as closures or permits.

Stringoptional
Direction Adirection_a

The first direction.

Stringoptional
Direction Bdirection_b

The second direction.

Stringoptional
Terminus Aterminus_a end_a

The first terminus.

Stringoptional
Terminus Bterminus_b end_b

The second terminus.

Stringoptional
Major junctionsjunctions junction

A brief list of major junctions. In the US, do not use more than 10.

Stringoptional
Beltway citybeltway_city

The city the beltway encircles.

Stringoptional
Orbital cityorbital

The city the orbital encircles.

Stringoptional
Loop road cityloop

The city the loop road encircles.

Stringoptional
Tourist loop citytloop

The city the tourist loop encircles.

Stringoptional
Time periodtime_period

The time period the road existed in.

Stringoptional
Established byestablished_by

If a time period is used, the body that built or established the road.

Stringoptional
Significancesignificance

If a time period is used, the historical/cultural significance of the route.

Stringoptional
Related roadsrelated

If a time period is used, roads related to the historical road.

Stringoptional
Subtypesubtype

If the route is a spur or a bannered route.

Stringoptional
Spur typespur_type

The type of the parent route that this is a spur of.

Stringoptional
Spur ofspur_of

The parent route of this spur route.

Stringoptional
County (for county routes)county

The county associated with the route that the article is about. Use only for county routes.

Stringoptional
Previous route typeprevious_type

The type code of the previous route in the system from Template:Infobox_road/doc/type.

Stringoptional
Next route typenext_type

The type code of the next route in the system from Template:Infobox_road/doc/type.

Stringoptional
Previous routeprevious_route

The number of the previous route in the system.

Stringoptional
Next routenext_route

The number of the next route in the system.

Stringoptional
Previous route disambiguationprevious_dab

The disambiguation suffix of the previous route in the system.

Stringoptional
Next route disambiguationnext_dab

The disambiguation suffix of the next route in the system.

Stringoptional
Browse routebrowse_route

The number of the current route in the system, if not the same as the rest of the infobox.

Stringoptional
Additional browse linesbrowse

Use to add additional browse lines with additional templates

Stringoptional
List of countriescountries

A list of countries the route enters (EUR, ASIA)

Stringoptional
List of regionsregions

A list of regions the route enters (EUR, ITA, HRV, CZE, CYP, GRC, POL, HUN, SVN, SVK, AUT, TUR, UKR, BIH, SRB, SGP)

Stringoptional
List of statesstates

A list of states the route enters (USA in multiple states, IND, DEU)

Stringoptional
List of provincesprovinces

A list of provinces the route enters (IRN, TUR, THA)

Stringoptional
List of countiescounties

A list of counties the route enters (anywhere)

Stringoptional
List of parishesparishes

A list of parishes the route enters (Louisiana)

Stringoptional
List of rural municipalitiesrural_municipalities

A list of countries the route enters (Manitoba, Saskatchewan)

Stringoptional
List of municipalitiesmunicipalities

A list of municipalities the route enters (Puerto Rico)

Stringoptional
List of districtsdistricts

A list of districts the route enters (India, other countries with districts)

Stringoptional
List of citiescities

A list of cities the route enters (everywhere but USA)

Stringoptional
List of townstowns

A list of towns the route enters (everywhere but USA)

Stringoptional
List of villagesvillages

A list of villages the route enters (everywhere but USA)

Stringoptional
List of destinationsdestinations

A list of primary destinations the route enters (AUS, GBR, IRL, MYS, NZL, IND)

Stringoptional
List of LGAslga

A list of LGAs the route enters (Australia)

Stringoptional
List of locationslocations

A list of locations the route enters (Australia)

Stringoptional
Section of codesection

The section of the highway code the route is defined in.

Stringoptional
Subsection of codesubsection

The subsection of the highway code the route is defined in (for Minnesota only).

Stringoptional
Header typeheader_type

under construction, historic, former, freeway (Canada only), minor (UK only)

Stringoptional
Highway systemsystem

The highway system the article route is a part of. Typically not used for numbered routes.

Stringoptional
E-roade-road

The E-road that the route is a part of (Europe).

Stringoptional
E-road route marker imagee-road-shield

Route marker image for the E-road that the route is a part of (Europe). Requires full wiki markup.

Stringoptional
Asian Highway Network designationahn

The Asian Highway that the route is a part of.

Stringoptional
Asian Highway route marker imageahn-shield

Route marker image for the Asian Highway that the route is a part of. Requires full wiki markup.

Stringoptional
Trans-African Highway designationtahn

The Trans-African Highway that the route is a part of.

Stringoptional
Trans-African Highway route marker imagetahn-shield

Route marker image for the Trans-African Highway that the route is a part of. Requires full wiki markup.

Stringoptional
Header for section 1section1

If the route is divided into sections, this is the header for section 1.

Default
Section 1
Stringoptional
Section 1 length in mileslength_mi1

If and only if the route is in a country on the imperial system, list the length in miles on section 1 here.

Numberoptional
Section 1 length in kilometreslength_km1

If and only if the route is in a country on the metric system, list the length in kilometres on section 1 here.

Numberoptional
Length round for section 1length_round1

Number of decimal places to be used in the conversion on section 1.

Numberoptional
Length reference for section 1length_ref1

A reference for the given length for section 1.

Stringoptional
Length notes for section 1length_notes1

Notes for the length for section 1.

Stringoptional
Direction A for section 1direction_a1

The first direction for section 1, to override direction_a.

Stringoptional
Direction B for section 1direction_b1

The second direction for section 1, to override direction_b.

Stringoptional
Terminus A for section 1terminus_a1 end_a1

The first terminus for section 1.

Stringoptional
Terminus B for section 1terminus_b1 end_b1

The second terminus for section 1.

Stringoptional
Major junctions for section 1junctions1

A brief list of major junctions for section 1. In the US, do not use more than 10.

Stringoptional
Header for section 2section2

If the route is divided into sections, this is the header for section 2.

Default
Section 2
Stringoptional
Section 2 length in mileslength_mi2

If and only if the route is in a country on the imperial system, list the length in miles on section 2 here.

Numberoptional
Section 2 length in kilometreslength_km2

If and only if the route is in a country on the metric system, list the length in kilometres on section 2 here.

Numberoptional
Length round for section 2length_round2

Number of decimal places to be used in the conversion on section 2.

Numberoptional
Length reference for section 2length_ref2

A reference for the given length for section 2.

Stringoptional
Length notes for section 2length_notes2

Notes for the length for section 2.

Stringoptional
Direction A for section 2direction_a2

The first direction for section 2, to override direction_a.

Stringoptional
Direction B for section 2direction_b2

The second direction for section 2, to override direction_b.

Stringoptional
Terminus A for section 2terminus_a2 end_a2

The first terminus for section 2.

Stringoptional
Terminus B for section 2terminus_b2 end_b2

The second terminus for section 2.

Stringoptional
Major junctions for section 2junctions2

A brief list of major junctions for section 2. In the US, do not use more than 10.

Stringoptional
Header for section 3section3

If the route is divided into sections, this is the header for section 3.

Default
Section 3
Stringoptional
Section 3 length in mileslength_mi3

If and only if the route is in a country on the imperial system, list the length in miles on section 3 here.

Numberoptional
Section 3 length in kilometreslength_km3

If and only if the route is in a country on the metric system, list the length in kilometres on section 3 here.

Numberoptional
Length round for section 3length_round3

Number of decimal places to be used in the conversion on section 3.

Numberoptional
Length reference for section 3length_ref3

A reference for the given length for section 3.

Stringoptional
Length notes for section 3length_notes3

Notes for the length for section 3.

Stringoptional
Direction A for section 3direction_a3

The first direction for section 3, to override direction_a.

Stringoptional
Direction B for section 3direction_b3

The second direction for section 3, to override direction_b.

Stringoptional
Terminus A for section 3terminus_a3 end_a3

The first terminus for section 3.

Stringoptional
Terminus B for section 3terminus_b3 end_b3

The second terminus for section 3.

Stringoptional
Major junctions for section 3junctions3

A brief list of major junctions for section 3. In the US, do not use more than 10.

Stringoptional
Header for section 4section4

If the route is divided into sections, this is the header for section 4.

Default
Section 4
Stringoptional
Section 4 length in mileslength_mi4

If and only if the route is in a country on the imperial system, list the length in miles on section 4 here.

Numberoptional
Section 4 length in kilometreslength_km4

If and only if the route is in a country on the metric system, list the length in kilometres on section 4 here.

Numberoptional
Length round for section 4length_round4

Number of decimal places to be used in the conversion on section 4.

Numberoptional
Length reference for section 4length_ref4

A reference for the given length for section 4.

Stringoptional
Length notes for section 4length_notes4

Notes for the length for section 4.

Stringoptional
Direction A for section 4direction_a4

The first direction for section 4, to override direction_a.

Stringoptional
Direction B for section 4direction_b4

The second direction for section 4, to override direction_b.

Stringoptional
Terminus A for section 4terminus_a4 end_a4

The first terminus for section 4.

Stringoptional
Terminus B for section 4terminus_b4 end_b4

The second terminus for section 4.

Stringoptional
Major junctions for section 4junctions4

A brief list of major junctions for section 4. In the US, do not use more than 10.

Stringoptional